We do offer grease cap installation tools, three of which are shown on the linked page, such as # 290-992.
The primary use of these is allowing you to install a grease cap with even pressure all around, without deforming it. Although not intended as a "removal tool" these can still help you loosen a grease cap since they fit over the entire cap and allow you to wobble it slightly to break it free from the hub bore.
You can also use gentle application of a rubber mallet to help coax a... view full answer...
The electric brake assemblies we offer for a 7,200-lb axle are manual adjust brakes. We do not offer self-adjusting electric brakes that measure 12-1/4 x 2-1/2 inch.
For the right hand you would need part # 23-429, and for the left hand you would need part # 23-428.
If you need a brake adjustment tool I recommend part # W80630. view full answer...
Only a Class I hitch, part # C11411, is offered for your 2015 Volkswagen Golf SportWagen. This Curt hitch fits the TDI models other than the R edition. The hitch offers a 1-1/4-inch receiver opening (like a Class II) and a 200-lb tongue weight (TW) capacity. Installation requires no drilling and mostly basic hand tools. The only special tool needed is a torque wrench like # ALL944001.
In this Class I hitch you can use compatible Class I accessories like 2-bike racks and cargo carriers.... view full answer...
The Econo Porch Trailer Step with Handrail and Landing, # EHS-102-R that you linked to has a overall height of 20-1/2". So that is slightly above the 19" drop that I understand you have from the ground to door opening. The # EHS-102-R-HR is the version with a hand rail on each side. These can be delivered directly to your address and come mostly assembled. They really are a great option for a solid step with a rail. You simply need to unfold the step and lock into place then attach the... view full answer...
Curt offers a 1-1/4-inch light-duty Class I trailer hitch for your 2015 Nissan Juke SL All-Wheel-Drive. That hitch is part # C11088. It fits all AWD models except the NISMO.
This hitch requires no drilling and includes the necessary installation hardware to bolt it on your Juke AWD. I have linked the written instructions, which detail the tools required. These basic hand tools include a torque wrench like # ALL944001. I also linked for you an installation video showing a 2013 model year... view full answer...
You can see the available 2-inch Class III hitches for your 2015 Nissan Murano by clicking on the link provided for you. Since you will be using the hitch for a scooter carrier you want to use the highest tongue weight (TW) hitch you can.
I recommend the Draw-Tite trailer hitch # 75952 since it offer a 600-lb TW capacity. Installation is shown in the linked video and instructions. Installation requires basic hand tools (please see the instructions for a complete list) and also a torque... view full answer...
We do offer the Curt # C11326 for the 2007 Saab 9-3, including the sedan and convertible. This is a fit unless it has dual-exhaust or a SportCombi model.
However, this is a light-duty Class I hitche. We offer no Class II hitches for your vehicle.
To a degree the development of hitches for vehicles will be based on the vehicle's capacity, in your case a quoted 3500-lb towing capacity. Certainly, a vehicle with such towing capacity would seem to merit a Class II hitch option. Unfortunately,... view full answer...
We do offer an under-trailer spare tire carrier (see the Lippert Underchassis Double Bin Storage Unit w/ Spare Tire Carrier for RVs part # LC125460). This unit stow supplies, tools, and a spare tire and mounts beneath your RV or trailer chassis. It contains two 27-7/8" long x 17" wide x 8" tall, slide-out bins with lids that hold up to 100 lbs each. It bolts onto your trailer's frame.
The storage container features a crank winch for raising and lowering the tire. At present we do not... view full answer...
Your 2014 Toyota RAV4 LE can be equipped with either a 1-1/4-inch Class II or a heavier-duty 2-inch Class III hitch. All options can be seen on the link provided. I recommend a 2-inch Class III hitch like the Curt # C13149 for its higher capacity (and safety margin) and for its generally better compatibility with a broad range of hitch-mount accessories like bike and cargo carriers.
Hitch installation requires mostly basic mechanical skills and hand tools. The only specialized tool needed... view full answer...
We do have several choices for you in a 1-1/4-inch Class I hitch for your 2013 Dodge Avenger R/T with Dual Exhaust. These can be seen on the link provided for you. I checked with my technical contact at Hidden Hitch and Draw-Tite and your dual exhaust R/T is fully compatible with these light-duty hitches.
If your intended use for the hitch is to install a bike carrier, then the hitch I suggest is the Draw-Tite # 24871. Unlike the Curt model # C11133 this hitch does not require you to use... view full answer...
Go To Results